Timber & Sheets
CLS Studwork Timber delivered to Washington
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Washington, we can supply the CLS timber and deliver to site.
Delivery facts for Washington
- How it arrives
- Bundles with your boards
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Chester-le-Street (4 mi), Felling (4 mi), Houghton-le-Spring (5 mi)
- Delivering to
- Washington (Tyne and Wear)
- Daylight
- About 7h 11m on the shortest day
- Postcode districts
- NE37, NE38, DH4, DH3
Choosing from our CLS timber range
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Working out quantities for your Washington job
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Things to check before you order
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Delivery to Washington: what helps
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Washington is inside our standard mainland delivery area.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- On busy streets in Washington, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Ordering CLS timber for Washington: FAQs
Is there a minimum order for delivery to Washington?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
Do you deliver CLS timber to trades and homeowners in Washington?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Other towns near Washington
- CLS Studwork Timber in Chester-le-Street
- CLS Studwork Timber in Felling
- CLS Studwork Timber in Houghton-le-Spring
- CLS Studwork Timber in Hebburn
- CLS Studwork Timber in Sunderland
- CLS Studwork Timber in Gateshead
Complete your Washington order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.