SK Trade, sktrade.co.uk

Timber & Sheets

Order CLS timber for delivery in Houghton-le-Spring

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

From DH4 to DH6, we price CLS timber delivered to Houghton-le-Spring and confirm the drop point and date when you order.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Delivery facts for Houghton-le-Spring

Delivery
Standard mainland delivery
Postcode districts
DH4, DH5, SR3, DH6
How it arrives
Bundles with your boards
Daylight
About 7h 12m on the shortest day
Nearby (straight line)
Chester-le-Street (5 mi), Washington (5 mi), Seaham (5 mi)
Delivering to
Houghton-le-Spring (Tyne and Wear)

Choosing from our CLS timber range

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • FixingsScrews, nails and frame fixings to suit.
  • Noggins and head platesCut from the same stock.

Planning the drop in Houghton-le-Spring

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Houghton-le-Spring is inside our standard mainland delivery area.

  • For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
  • Give us the full postcode for the drop point; deliveries around DH4 are priced to the exact address.
  • On busy streets in Houghton-le-Spring, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

How much will you need?

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Ordering CLS timber for Houghton-le-Spring: FAQs

Is there a minimum order for delivery to Houghton-le-Spring?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Can you deliver CLS timber to a site with restricted access in Houghton-le-Spring?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price