CLS Studwork Timber delivered to Hebburn

What CLS timber can we deliver to Hebburn?

• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

Getting CLS timber onto your Hebburn site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Hebburn is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Quantities: a worked example

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

CLS Studwork Timber in Hebburn: questions

Can you deliver CLS timber to a site with restricted access in Hebburn?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver CLS timber to Hebburn?

Yes. We deliver across Hebburn, including NE31, NE32. Hebburn is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.