Timber & Sheets
Order CLS timber for delivery in London
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in London can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

Delivery facts for London
- Delivering to
- London, Greater London
- Daylight
- About 7h 49m on the shortest day
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Pimlico (1 mi), Islington (2 mi), Chelsea (2 mi)
- How it arrives
- Bundles with your boards
- Postcode districts
- EC1, WC1, SE1, W1
CLS Studwork Timber available for London delivery
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Quantities: a worked example
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Delivering CLS timber in London
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. London is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- In summer London gets around 16h 38m of daylight, but early deliveries still beat the traffic and give the longest working day.
Before you order CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Ordering CLS timber for London: FAQs
Is there a minimum order for delivery to London?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Do you deliver CLS timber to London?
Yes. We deliver across London, including EC1, WC1, SE1, W1. London is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Close to London
- CLS Studwork Timber in Pimlico
- CLS Studwork Timber in Islington
- CLS Studwork Timber in Chelsea
- CLS Studwork Timber in Battersea
- CLS Studwork Timber in Holloway
- CLS Studwork Timber in Brixton
Other materials for London sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
