CLS Studwork Timber delivered across Isle of Wight

CLS Studwork Timber available for Isle of Wight delivery

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

CLS Studwork Timber delivered in Isle of Wight towns

• CLS Studwork Timber in Newport (Isle of Wight)
• CLS Studwork Timber in Ryde
• CLS Studwork Timber in Cowes
• CLS Studwork Timber in Sandown

Working out quantities for your Isle of Wight job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before your Isle of Wight delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Deliveries across Isle of Wight need a ferry crossing, so each one is quoted with the crossing included.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

CLS Studwork Timber: choosing well

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Common questions from Isle of Wight

Do you deliver CLS timber to Isle of Wight?

Yes. We deliver across Isle of Wight, including PO. Deliveries across Isle of Wight need a ferry crossing, so each one is quoted with the crossing included. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can you deliver CLS timber to a site with restricted access in Isle of Wight?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.