Timber & Sheets
CLS Studwork Timber delivery in Sandown
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Sandown can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

CLS Studwork Timber to Sandown: the basics
- How it arrives
- Bundles with your boards
- Postcode districts
- PO36, PO37, PO38, PO30
- Daylight
- About 7h 58m on the shortest day
- Delivery
- Quoted individually (ferry crossing)
- Nearby (straight line)
- Ryde (5 mi), Newport (Isle of Wight) (7 mi), Cowes (10 mi)
- Delivering to
- Sandown, Isle of Wight
What CLS timber can we deliver to Sandown?
- FixingsScrews, nails and frame fixings to suit.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
CLS Studwork Timber: choosing well
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
How much will you need?
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Planning the drop in Sandown
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Sandown needs a ferry crossing, so deliveries are quoted individually with the crossing included.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Give us the full postcode for the drop point; deliveries around PO36 are priced to the exact address.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
CLS Studwork Timber in Sandown: questions
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Do you deliver CLS timber to Sandown?
Yes. We deliver across Sandown, including PO36, PO37, PO38, PO30. Sandown needs a ferry crossing, so deliveries are quoted individually with the crossing included. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Is there a minimum order for delivery to Sandown?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Other towns near Sandown
- CLS Studwork Timber in Ryde
- CLS Studwork Timber in Newport (Isle of Wight)
- CLS Studwork Timber in Cowes
- CLS Studwork Timber in Gosport
- CLS Studwork Timber in Portsmouth
- CLS Studwork Timber in Fareham
Complete your Sandown order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
