Order CLS timber for delivery in Cowes

What CLS timber can we deliver to Cowes?

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Planning the drop in Cowes

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Cowes needs a ferry crossing, so deliveries are quoted individually with the crossing included.

• Give us the full postcode for the drop point; deliveries around PO31 are priced to the exact address.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Estimating your CLS timber

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Ordering CLS timber for Cowes: FAQs

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

How soon can CLS timber be delivered in Cowes?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can you deliver CLS timber to a site with restricted access in Cowes?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.