SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber for Glasgow, delivered to site

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Whether it is a repair, an extension or a new build in Glasgow, we can supply the CLS timber and deliver to site.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Glasgow delivery at a glance

Postcode districts
G1, G2, G3
How it arrives
Bundles with your boards
Delivery
Standard mainland delivery
Daylight
About 6h 59m on the shortest day
Delivering to
Glasgow
Nearby (straight line)
Rutherglen (3 mi), Bishopbriggs (3 mi), Bearsden (5 mi)

CLS Studwork Timber we supply in Glasgow

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • Noggins and head platesCut from the same stock.

Before you order CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Planning the drop in Glasgow

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Glasgow is inside our standard mainland delivery area.

  • With roughly 6h 59m of daylight in Glasgow around the shortest day, morning deliveries leave more working light for the job.
  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
  • If neighbours share the access, it helps to let them know a lorry is coming.

Quantities: a worked example

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber in Glasgow: questions

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Do you deliver CLS timber to Glasgow?

Yes. We deliver across Glasgow, including G1, G2, G3. Glasgow is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is there a minimum order for delivery to Glasgow?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price