Timber & Sheets
CLS Studwork Timber delivery in Bearsden
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Need CLS timber on site in Bearsden? Tell us what you are building and we will work out the quantities and price it delivered.
CLS Studwork Timber to Bearsden: the basics
- Delivering to
- Bearsden, Dunbartonshire
- How it arrives
- Bundles with your boards
- Daylight
- About 6h 58m on the shortest day
- Nearby (straight line)
- Clydebank (3 mi), Renfrew (4 mi), Bishopbriggs (4 mi)
- Delivery
- Standard mainland delivery
- Postcode districts
- G61, G13, G62, G23
Choosing from our CLS timber range
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
Planning the drop in Bearsden
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Bearsden is inside our standard mainland delivery area.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
Working out quantities for your Bearsden job
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Picking the right product
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
CLS Studwork Timber in Bearsden: questions
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
Can I add other materials to my Bearsden delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can you deliver CLS timber to a site with restricted access in Bearsden?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Other towns near Bearsden
- CLS Studwork Timber in Clydebank
- CLS Studwork Timber in Renfrew
- CLS Studwork Timber in Bishopbriggs
- CLS Studwork Timber in Glasgow
- CLS Studwork Timber in Paisley
- CLS Studwork Timber in Kirkintilloch
Other materials for Bearsden sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.