SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivery in Renfrew

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

SK Trade prices CLS timber delivered to Renfrew and the rest of Renfrewshire and Inverclyde, so the cost and the delivery date are agreed before anything is loaded.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

CLS Studwork Timber to Renfrew: the basics

Daylight
About 6h 58m on the shortest day
How it arrives
Bundles with your boards
Nearby (straight line)
Clydebank (2 mi), Paisley (3 mi), Bearsden (4 mi)
Delivering to
Renfrew (Renfrewshire and Inverclyde)
Delivery
Standard mainland delivery
Postcode districts
PA4, PA3

CLS Studwork Timber we supply in Renfrew

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • Noggins and head platesCut from the same stock.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • FixingsScrews, nails and frame fixings to suit.

Quantities: a worked example

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Renfrew: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Renfrew is inside our standard mainland delivery area.

  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • With roughly 6h 58m of daylight in Renfrew around the shortest day, morning deliveries leave more working light for the job.
  • In summer Renfrew gets around 17h 35m of daylight, but early deliveries still beat the traffic and give the longest working day.

Things to check before you order

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Questions about CLS timber delivery in Renfrew

Can you deliver CLS timber to a site with restricted access in Renfrew?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is there a minimum order for delivery to Renfrew?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price