Timber & Sheets
Order CLS timber for delivery in Cramlington
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Order CLS timber for Cramlington with one message: we check the quantities, price the delivery and confirm everything before you pay.

CLS Studwork Timber to Cramlington: the basics
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 09m on the shortest day
- Delivering to
- Cramlington, Northumberland
- How it arrives
- Bundles with your boards
- Postcode districts
- NE23, NE25, NE24
- Nearby (straight line)
- Bedlington (3 mi), Blyth (4 mi), Gosforth (6 mi)
Choosing from our CLS timber range
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
How much will you need?
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting the right CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Planning the drop in Cramlington
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Cramlington is inside our standard mainland delivery area.
- Give us the full postcode for the drop point; deliveries around NE23 are priced to the exact address.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
CLS Studwork Timber in Cramlington: questions
Can you deliver CLS timber to a site with restricted access in Cramlington?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
How soon can CLS timber be delivered in Cramlington?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Bedlington
- CLS Studwork Timber in Blyth
- CLS Studwork Timber in Gosforth
- CLS Studwork Timber in Ashington
- CLS Studwork Timber in Whitley Bay
- CLS Studwork Timber in Wallsend
Also available in Cramlington
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
