CLS Studwork Timber for sites in Northumberland

Choosing from our CLS timber range

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

CLS Studwork Timber delivered in Northumberland towns

• CLS Studwork Timber in Blyth
• CLS Studwork Timber in Cramlington
• CLS Studwork Timber in Ashington
• CLS Studwork Timber in Bedlington

Working out quantities for your Northumberland job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

How delivery works in Northumberland

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Northumberland.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Before you order CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Questions about CLS timber delivery in Northumberland

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Can I add other materials to my Northumberland delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver CLS timber to a site with restricted access in Northumberland?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.