Timber & Sheets
CLS Studwork Timber delivery in Bedlington
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Bedlington, from a single pallet for a small job to full loads for bigger builds.

Your Bedlington delivery
- Nearby (straight line)
- Cramlington (3 mi), Blyth (3 mi), Ashington (3 mi)
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 08m on the shortest day
- Postcode districts
- NE22, NE24, NE62, NE63
- Delivering to
- Bedlington, Northumberland
- Delivery
- Standard mainland delivery
Choosing from our CLS timber range
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
A quick quantity check
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Planning the drop in Bedlington
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Bedlington is inside our standard mainland delivery area.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- If neighbours share the access, it helps to let them know a lorry is coming.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
Getting the right CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
CLS Studwork Timber questions
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Do you deliver CLS timber to trades and homeowners in Bedlington?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to Bedlington?
Yes. We deliver across Bedlington, including NE22, NE24, NE62, NE63. Bedlington is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Also delivering CLS timber nearby
- CLS Studwork Timber in Cramlington
- CLS Studwork Timber in Blyth
- CLS Studwork Timber in Ashington
- CLS Studwork Timber in Whitley Bay
- CLS Studwork Timber in Gosforth
- CLS Studwork Timber in North Shields
More materials delivered to Bedlington
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
