Timber & Sheets
CLS Studwork Timber for Gosforth, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
From NE3 to NE4, we price CLS timber delivered to Gosforth and confirm the drop point and date when you order.
CLS Studwork Timber to Gosforth: the basics
- Postcode districts
- NE3, NE2, NE1, NE4
- Daylight
- About 7h 10m on the shortest day
- Nearby (straight line)
- Newcastle upon Tyne (2 mi), Gateshead (3 mi), Wallsend (3 mi)
- How it arrives
- Bundles with your boards
- Delivering to
- Gosforth (Tyne and Wear)
- Delivery
- Standard mainland delivery
What CLS timber can we deliver to Gosforth?
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Before you order CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Sizing your order
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Before your Gosforth delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Gosforth is inside our standard mainland delivery area.
- Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Give us the full postcode for the drop point; deliveries around NE3 are priced to the exact address.
Ordering CLS timber for Gosforth: FAQs
Is there a minimum order for delivery to Gosforth?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can I add other materials to my Gosforth delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
CLS Studwork Timber in neighbouring towns
- CLS Studwork Timber in Newcastle upon Tyne
- CLS Studwork Timber in Gateshead
- CLS Studwork Timber in Wallsend
- CLS Studwork Timber in Felling
- CLS Studwork Timber in Hebburn
- CLS Studwork Timber in Newburn
Add to your Gosforth delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.