SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber for Cannock, delivered to site

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Trades and homeowners in Cannock can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Delivery facts for Cannock

Postcode districts
WS11, WS12, WS6
Nearby (straight line)
Burntwood (4 mi), Bloxwich (5 mi), Rugeley (6 mi)
Delivery
Standard mainland delivery
Daylight
About 7h 37m on the shortest day
Delivering to
Cannock, Staffordshire
How it arrives
Bundles with your boards

CLS Studwork Timber we supply in Cannock

  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • Noggins and head platesCut from the same stock.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Estimating your CLS timber

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before you order CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Before your Cannock delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Cannock is inside our standard mainland delivery area.

  • For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Ordering CLS timber for Cannock: FAQs

Is there a minimum order for delivery to Cannock?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Do you deliver CLS timber to Cannock?

Yes. We deliver across Cannock, including WS11, WS12, WS6. Cannock is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price