Timber & Sheets
Order CLS timber for delivery in Bloxwich
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
From WS3 to WS1, we price CLS timber delivered to Bloxwich and confirm the drop point and date when you order.
Your Bloxwich delivery
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 38m on the shortest day
- How it arrives
- Bundles with your boards
- Postcode districts
- WS3, WV12, WV13, WS1
- Delivering to
- Bloxwich, West Midlands
- Nearby (straight line)
- Walsall (2 mi), Willenhall (3 mi), Wednesfield (4 mi)
Choosing from our CLS timber range
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Planning the drop in Bloxwich
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Bloxwich is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- If neighbours share the access, it helps to let them know a lorry is coming.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
CLS Studwork Timber: choosing well
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Sizing your order
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Questions about CLS timber delivery in Bloxwich
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Is there a minimum order for delivery to Bloxwich?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Can you deliver CLS timber to a site with restricted access in Bloxwich?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Other towns near Bloxwich
- CLS Studwork Timber in Walsall
- CLS Studwork Timber in Willenhall
- CLS Studwork Timber in Wednesfield
- CLS Studwork Timber in Aldridge
- CLS Studwork Timber in Wednesbury
- CLS Studwork Timber in Cannock
More from SK Trade in Bloxwich
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.