SK Trade, sktrade.co.uk

Building Materials

Bricks delivery in Cannock

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

Building in Cannock? Send us your list and we will come back with a delivered price for the bricks and anything else on it.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Your Cannock delivery

Postcode districts
WS11, WS12, WS6
How it arrives
Strapped packs, usually crane offload
Delivering to
Cannock, Staffordshire
Nearby (straight line)
Burntwood (4 mi), Bloxwich (5 mi), Rugeley (6 mi)
Daylight
About 7h 37m on the shortest day
Delivery
Standard mainland delivery

Bricks we supply in Cannock

  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
  • Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.
  • Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
  • Common bricksPlain bricks for internal or hidden walls where looks do not matter.

Estimating your bricks

Take a garden wall in Cannock 4 m long and 1.5 m high: 6 m². At 60 bricks per square metre plus 5% for cuts that is 378 bricks, roughly 1 pack of 500 depending on the maker, laid in about 0.35 tonnes of building sand and 4 bags of cement at a 1:4 mix. Try the brick calculator

Delivery to Cannock: what helps

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Cannock is inside our standard mainland delivery area.

  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Bricks: choosing well

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or building control may specify one.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Common questions from Cannock

Do you deliver bricks to trades and homeowners in Cannock?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Cannock?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much mortar do 1,000 bricks need?

Roughly half a cubic metre of mixed mortar, which is about 1 tonne of building sand and 8 to 9 bags of cement at a 1:4 mix. Our brick calculator works it out for your wall.

Can you match my existing bricks?

Often, yes. Send the brick name if you have it, or a daylight photo of a clean face with a tape measure for scale. We will look for the nearest match in current ranges and can usually arrange a sample before you commit to a full order.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price