Concrete & Aircrete Blocks delivered to Cannock

Concrete & Aircrete Blocks we supply in Cannock

• Block paving and edgingsOn request alongside your sub-base and sand.
• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.

A quick quantity check

A single-skin block wall in Cannock 10 m long and 2.7 m high is 27 m². At 10 blocks per square metre plus 5% you need 284 blocks, with about 0.39 tonnes of building sand and 4 bags of cement for the mortar at 1:4. Try the block calculator

Concrete & Aircrete Blocks: choosing well

Thickness

100 mm is the common inner-leaf thickness. Wider blocks (140, 190, 215 mm) are used for separating walls, single-skin garage walls and foundations.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Getting concrete blocks onto your Cannock site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Cannock is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Common questions from Cannock

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

Do you deliver concrete blocks to trades and homeowners in Cannock?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How much mortar for blockwork?

Roughly 0.008 to 0.01 cubic metres of mortar per square metre of 100 mm blockwork, allowing for waste. Use our block calculator for sand and cement quantities.

Is there a minimum order for delivery to Cannock?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.