Timber & Sheets
CLS Studwork Timber delivered to Walsall
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Whether it is a repair, an extension or a new build in Walsall, we can supply the CLS timber and deliver to site.
Walsall delivery at a glance
- Daylight
- About 7h 38m on the shortest day
- Delivering to
- Walsall, West Midlands
- Delivery
- Standard mainland delivery
- How it arrives
- Bundles with your boards
- Nearby (straight line)
- Bloxwich (2 mi), Wednesbury (3 mi), Aldridge (3 mi)
- Postcode districts
- WS1, WS2, WS5, WS4
Choosing from our CLS timber range
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- FixingsScrews, nails and frame fixings to suit.
Getting the right CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Sizing your order
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Before your Walsall delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Walsall is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- With roughly 7h 38m of daylight in Walsall around the shortest day, morning deliveries leave more working light for the job.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Ordering CLS timber for Walsall: FAQs
Do you deliver CLS timber to trades and homeowners in Walsall?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Can you deliver CLS timber to a site with restricted access in Walsall?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Other towns near Walsall
- CLS Studwork Timber in Bloxwich
- CLS Studwork Timber in Wednesbury
- CLS Studwork Timber in Aldridge
- CLS Studwork Timber in Willenhall
- CLS Studwork Timber in Wednesfield
- CLS Studwork Timber in West Bromwich
Complete your Walsall order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.