Plasterboard delivery in Staffordshire

Plasterboard we supply in Staffordshire

• Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
• Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
• Tapered and square edgeTapered edge for taped joints; square edge for skimming.
• Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.
• Fire-resistant boardHigher fire performance for garages, escape routes and separating walls.

Plasterboard delivered in Staffordshire towns

• Plasterboard in Stoke-on-Trent
• Plasterboard in Newcastle-under-Lyme
• Plasterboard in Burton upon Trent
• Plasterboard in Cannock
• Plasterboard in Tamworth
• Plasterboard in Stafford
• Plasterboard in Lichfield
• Plasterboard in Kidsgrove
• Plasterboard in Burntwood
• Plasterboard in Longton
• Plasterboard in Rugeley

Sizing your order

A new 6 m partition 2.4 m high, boarded on both sides, is 28.8 m² of board: 11 sheets of 2400 × 1200 mm with 10% for cutting, and about 385 drywall screws. Try the plasterboard calculator

Delivery to Staffordshire: what helps

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Our standard mainland delivery area covers Staffordshire.

• On busy streets in Staffordshire, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.

Choosing plasterboard

Tapered or square edge?

Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.

Which thickness?

12.5 mm is the everyday choice for walls and ceilings on 400 or 600 mm centres; 9.5 mm suits ceilings at 400 mm centres. Fire and acoustic designs may call for 15 mm or two layers.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

What thickness plasterboard for walls?

12.5 mm is the standard choice for walls on studs at 400 or 600 mm centres.

Can you deliver plasterboard to a site with restricted access in Staffordshire?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver plasterboard to trades and homeowners in Staffordshire?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can plasterboard be stored outside?

No. Keep boards flat, off the ground and dry, ideally inside the building.