Cement & Aggregates
MOT Type 1 Sub-base delivery in Cumbria
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
Builders, trades and self-builders in Cumbria can order MOT Type 1 for delivery to Carlisle, Workington and the towns in between.

Cumbria at a glance
- Covering
- 5 towns across Cumbria
- Postcode areas
- CA, LA
- Delivery
- Standard mainland delivery
- How it arrives
- Bulk bags or tipped loads
- Neighbouring areas
- Dumfries and Galloway, Lancashire, Durham
Choosing from our MOT Type 1 range
- HardcoreBroken masonry fill for bulking up ground.
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- ScalpingsCheaper granular fill for less demanding areas.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
MOT Type 1 Sub-base delivered in Cumbria towns
- MOT Type 1 Sub-base in Carlisle
- MOT Type 1 Sub-base in Barrow-in-Furness
- MOT Type 1 Sub-base in Kendal
- MOT Type 1 Sub-base in Whitehaven
- MOT Type 1 Sub-base in Workington
How much will you need?
An 8 × 5 m area at 150 mm compacted is 6 m³. At about 2.1 tonnes per cubic metre plus 10% that is 13.9 tonnes, or around 17 bulk bags. Try the sub-base calculator
Delivering MOT Type 1 in Cumbria
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Our standard mainland delivery area covers Cumbria.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Getting the right MOT Type 1
Virgin or recycled?
Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
Common questions from Cumbria
How much MOT Type 1 do I need?
Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.
Does Type 1 drain?
Type 1 is reasonably free-draining when compacted, which is one reason it is used under drives and patios.
Can I add other materials to my Cumbria delivery?
Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can you deliver MOT Type 1 to a site with restricted access in Cumbria?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
MOT Type 1 Sub-base in neighbouring areas
- MOT Type 1 Sub-base in Dumfries and Galloway
- MOT Type 1 Sub-base in Lancashire
- MOT Type 1 Sub-base in Durham
- MOT Type 1 Sub-base in Merseyside
- MOT Type 1 Sub-base in Tyne and Wear
More materials delivered across Cumbria
- Anchors, Bolts & Threaded Rod in Cumbria
- Treated Carcassing Timber in Cumbria
- Planed Timber & Mouldings in Cumbria
- Metal Stud & Ceiling Systems in Cumbria
- Bagged Concrete & Mortar Mixes in Cumbria
- PIR Insulation Boards in Cumbria
- Damp Proofing & Membranes in Cumbria
- Joist Hangers & Timber Connectors in Cumbria
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
