Order MOT Type 1 for delivery in Crewe

MOT Type 1 Sub-base we supply in Crewe

• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• HardcoreBroken masonry fill for bulking up ground.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
• ScalpingsCheaper granular fill for less demanding areas.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.

Planning the drop in Crewe

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Crewe is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Sizing your order

A 5 × 4 m area at 150 mm compacted is 3 m³. At about 2.1 tonnes per cubic metre plus 10% that is 6.9 tonnes, or around 9 bulk bags. Try the sub-base calculator

Things to check before you order

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Ordering MOT Type 1 for Crewe: FAQs

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.

Can I add other materials to my Crewe delivery?

Yes. Put everything on one list, from MOT Type 1 to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver MOT Type 1 to a site with restricted access in Crewe?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How deep should a driveway sub-base be?

Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.