Plywood for Crewe, delivered to site

Which plywood can you order in Crewe?

• Marine plywoodHigh-grade ply for very demanding conditions.
• Hardwood-faced plywoodSmoother faces for joinery and fit-out.
• Exterior plywoodBonded for humid and exterior conditions.
• Structural softwood plywoodGraded for roof decks, floors and sheathing.

Planning the drop in Crewe

Sheets travel flat on the lorry bed and are hand-offloaded or crane-lifted in packs. Crewe is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• With roughly 7h 33m of daylight in Crewe around the shortest day, morning deliveries leave more working light for the job.

Getting the right plywood

Interior or exterior?

BS EN 636 classes plywood as class 1 (dry), class 2 (humid) or class 3 (exterior). Use class 3 for anything exposed to the weather.

Structural use

Roof decks and floors need plywood marked for structural use. Check the thickness against the joist spacing.

How much will you need?

Decking 30 m² with 2440 × 1220 mm sheets takes 12 sheets including 10% for cutting.

Ordering plywood for Crewe: FAQs

What thickness for a flat roof deck?

18 mm structural ply is common on joists at 400 mm centres; your design may specify more.

Is there a minimum order for delivery to Crewe?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver plywood to trades and homeowners in Crewe?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What plywood should I use outside?

Use plywood with an exterior bond, class 3 under BS EN 636, or marine ply for very wet conditions.