MOT Type 1 Sub-base delivery in Congleton

MOT Type 1 Sub-base we supply in Congleton

• HardcoreBroken masonry fill for bulking up ground.
• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
• ScalpingsCheaper granular fill for less demanding areas.
• MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.

Estimating your MOT Type 1

An 8 × 4 m area at 100 mm compacted is 3.2 m³. At about 2.1 tonnes per cubic metre plus 10% that is 7.4 tonnes, or around 9 bulk bags. Try the sub-base calculator

Getting MOT Type 1 onto your Congleton site

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Congleton is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Give us the full postcode for the drop point; deliveries around CW12 are priced to the exact address.

Getting the right MOT Type 1

How deep?

Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Your questions answered

What is the difference between Type 1 and scalpings?

Type 1 is graded to a specification so it compacts into a strong, stable layer. Scalpings are less controlled and suit less demanding areas.

Do you deliver MOT Type 1 to trades and homeowners in Congleton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can you deliver MOT Type 1 to a site with restricted access in Congleton?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How deep should a driveway sub-base be?

Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.