Building Materials
Order damp proofing for delivery in Crewe
Damp proofing materials stop moisture rising or passing through a building: a damp-proof course (DPC) in the walls and a damp-proof membrane (DPM) under the floor.
SK Trade is a builders' merchant delivering damp proofing into Crewe, priced to your postcode and confirmed in writing.

Crewe delivery at a glance
- Delivering to
- Crewe, Cheshire
- Nearby (straight line)
- Winsford (7 mi), Kidsgrove (8 mi), Congleton (11 mi)
- Delivery
- Standard mainland delivery
- How it arrives
- Rolls with a mixed load
- Postcode districts
- CW1, CW2, CW5
- Daylight
- About 7h 33m on the shortest day
Damp Proofing & Membranes we supply in Crewe
- Liquid DPM and tankingCoatings for screeds and below-ground walls.
- Cavity trays and stop endsTo direct water out of the cavity over openings.
- DPC rollsPolymer and bitumen damp-proof course in standard wall widths.
- DPM sheetingHeavy-gauge polythene membrane under concrete floors.
- Radon barriersGas-resistant membranes for areas that need radon protection.
Sizing your order
An extension in Crewe with 12 m of cavity wall needs DPC in both leaves: about 1 roll in 30 m lengths once laps are allowed for. A 25 m² floor slab needs about 28.7 m² of DPM including laps, which is 1 roll of 4 × 25 m sheeting.
Planning the drop in Crewe
Rolls are light enough to travel with a mixed load and are handed off at the kerb. Crewe is inside our standard mainland delivery area.
- On busy streets in Crewe, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- If neighbours share the access, it helps to let them know a lorry is coming.
Things to check before you order
DPC width
Match the DPC width to the wall leaf so it runs the full width of the masonry.
Laps and joints
DPM and DPC need generous laps and sealed joints; follow the manufacturer's guidance.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Ordering damp proofing for Crewe: FAQs
What is the difference between DPC and DPM?
DPC is a strip built into walls to stop damp rising through the masonry. DPM is a sheet laid under a concrete floor slab. They are lapped together so there is no gap.
How soon can damp proofing be delivered in Crewe?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Can you deliver damp proofing to a site with restricted access in Crewe?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Do you supply cavity trays?
Yes, with stop ends and weep vents for openings and abutments.
Damp Proofing & Membranes in neighbouring towns
- Damp Proofing & Membranes in Winsford
- Damp Proofing & Membranes in Kidsgrove
- Damp Proofing & Membranes in Congleton
- Damp Proofing & Membranes in Newcastle-under-Lyme
- Damp Proofing & Membranes in Northwich
- Damp Proofing & Membranes in Stoke-on-Trent
More from SK Trade in Crewe
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
