CLS Studwork Timber delivered across West Glamorgan

Our CLS timber range for West Glamorgan jobs

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.

CLS Studwork Timber delivered in West Glamorgan towns

• CLS Studwork Timber in Swansea
• CLS Studwork Timber in Neath
• CLS Studwork Timber in Briton Ferry
• CLS Studwork Timber in Gorseinon
• CLS Studwork Timber in Clydach
• CLS Studwork Timber in Ystalyfera

Working out quantities for your West Glamorgan job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before your West Glamorgan delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers West Glamorgan.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If neighbours share the access, it helps to let them know a lorry is coming.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Picking the right product

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

CLS Studwork Timber questions

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Do you deliver CLS timber to West Glamorgan?

Yes. We deliver across West Glamorgan, including SA. Our standard mainland delivery area covers West Glamorgan. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Can you deliver CLS timber to a site with restricted access in West Glamorgan?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.