SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered across Dyfed

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Builders, trades and self-builders in Dyfed can order CLS timber for delivery to Llanelli, Milford Haven and the towns in between.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Dyfed at a glance

Covering
6 towns across Dyfed
Postcode areas
SA, SY
Delivery
Standard mainland delivery
How it arrives
Bundles with your boards
Neighbouring areas
West Glamorgan, Mid Glamorgan, Powys

What CLS timber can we deliver to Dyfed?

  • Noggins and head platesCut from the same stock.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

CLS Studwork Timber delivered in Dyfed towns

Quantities: a worked example

A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Dyfed: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Dyfed.

  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
  • Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Before you order CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Ordering CLS timber for Dyfed: FAQs

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Can you deliver CLS timber to a site with restricted access in Dyfed?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver CLS timber to trades and homeowners in Dyfed?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price