Timber & Sheets
CLS Studwork Timber delivered to Thurso
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Thurso, from a single pallet for a small job to full loads for bigger builds.

Thurso delivery at a glance
- Nearby (straight line)
- Wick (19 mi), Lossiemouth (61 mi), Elgin (66 mi)
- How it arrives
- Bundles with your boards
- Delivering to
- Thurso, Highland
- Daylight
- About 6h 17m on the shortest day
- Delivery
- Quoted individually (Highlands and remote areas)
- Postcode districts
- KW14
What CLS timber can we deliver to Thurso?
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Getting CLS timber onto your Thurso site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Thurso is in an area where deliveries are priced individually because of the distance and access, so we quote each order separately.
- In summer Thurso gets around 18h 22m of daylight, but early deliveries still beat the traffic and give the longest working day.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- On busy streets in Thurso, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
CLS Studwork Timber: choosing well
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Sizing your order
A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
CLS Studwork Timber questions
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Can you deliver CLS timber to a site with restricted access in Thurso?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
How soon can CLS timber be delivered in Thurso?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Wick
- CLS Studwork Timber in Lossiemouth
- CLS Studwork Timber in Elgin
- CLS Studwork Timber in Buckie
- CLS Studwork Timber in Alness
- CLS Studwork Timber in Forres
Add to your Thurso delivery
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
