CLS Studwork Timber delivered to Lossiemouth

Which CLS timber can you order in Lossiemouth?

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• Noggins and head platesCut from the same stock.
• FixingsScrews, nails and frame fixings to suit.

Quantities: a worked example

A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivering CLS timber in Lossiemouth

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Lossiemouth is in an area where deliveries are priced individually because of the distance and access, so we quote each order separately.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in Lossiemouth, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Getting the right CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Questions about CLS timber delivery in Lossiemouth

Can you deliver CLS timber to a site with restricted access in Lossiemouth?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Lossiemouth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.