Timber & Sheets
CLS Studwork Timber delivered to Buckie
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Buckie, from a single pallet for a small job to full loads for bigger builds.
Delivery facts for Buckie
- Delivery
- Standard mainland delivery
- Daylight
- About 6h 32m on the shortest day
- Delivering to
- Buckie, Moray
- Postcode districts
- AB56
- Nearby (straight line)
- Lossiemouth (12 mi), Elgin (13 mi), Forres (25 mi)
- How it arrives
- Bundles with your boards
Choosing from our CLS timber range
- FixingsScrews, nails and frame fixings to suit.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- Noggins and head platesCut from the same stock.
Picking the right product
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Planning the drop in Buckie
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Buckie is inside our standard mainland delivery area.
- With roughly 6h 32m of daylight in Buckie around the shortest day, morning deliveries leave more working light for the job.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Sizing your order
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Common questions from Buckie
Do you deliver CLS timber to trades and homeowners in Buckie?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Can you deliver CLS timber to a site with restricted access in Buckie?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Close to Buckie
- CLS Studwork Timber in Lossiemouth
- CLS Studwork Timber in Elgin
- CLS Studwork Timber in Forres
- CLS Studwork Timber in Nairn
- CLS Studwork Timber in Inverurie
- CLS Studwork Timber in Fraserburgh
Other materials for Buckie sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.