SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered to Stenhousemuir

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

We deliver CLS timber to sites, driveways and yards across Stenhousemuir, from a single pallet for a small job to full loads for bigger builds.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Your Stenhousemuir delivery

Delivering to
Stenhousemuir (Stirling, Falkirk and Clackmannanshire)
Delivery
Standard mainland delivery
Nearby (straight line)
Falkirk (2 mi), Grangemouth (4 mi), Alloa (6 mi)
Postcode districts
FK5, FK2, FK1
How it arrives
Bundles with your boards
Daylight
About 6h 56m on the shortest day

Our CLS timber range for Stenhousemuir jobs

  • Noggins and head platesCut from the same stock.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

How much will you need?

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before your Stenhousemuir delivery arrives

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Stenhousemuir is inside our standard mainland delivery area.

  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
  • Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

CLS Studwork Timber: choosing well

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

CLS Studwork Timber in Stenhousemuir: questions

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Is there a minimum order for delivery to Stenhousemuir?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver CLS timber to trades and homeowners in Stenhousemuir?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price