PIR Insulation Boards delivered to Stenhousemuir

Our PIR insulation boards range for Stenhousemuir jobs

• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.

Sizing your order

Insulating 45 m² of rafters, floor or wall takes 17 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Getting PIR insulation boards onto your Stenhousemuir site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Stenhousemuir is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Give us the full postcode for the drop point; deliveries around FK5 are priced to the exact address.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Before you order PIR insulation boards

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Ordering PIR insulation boards for Stenhousemuir: FAQs

Can you deliver PIR insulation boards to a site with restricted access in Stenhousemuir?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How soon can PIR insulation boards be delivered in Stenhousemuir?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.