Timber & Sheets
CLS Studwork Timber delivered to Bo’ness
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Bo’ness can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.
Bo’ness delivery at a glance
- Delivering to
- Bo’ness (Stirling, Falkirk and Clackmannanshire)
- How it arrives
- Bundles with your boards
- Delivery
- Standard mainland delivery
- Postcode districts
- EH51, EH49
- Daylight
- About 6h 56m on the shortest day
- Nearby (straight line)
- Grangemouth (4 mi), Falkirk (7 mi), Rosyth (7 mi)
Which CLS timber can you order in Bo’ness?
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
How delivery works in Bo’ness
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Bo’ness is inside our standard mainland delivery area.
- On busy streets in Bo’ness, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- With roughly 6h 56m of daylight in Bo’ness around the shortest day, morning deliveries leave more working light for the job.
- In summer Bo’ness gets around 17h 37m of daylight, but early deliveries still beat the traffic and give the longest working day.
Quantities: a worked example
A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Choosing CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Your questions answered
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to Bo’ness?
Yes. We deliver across Bo’ness, including EH51, EH49. Bo’ness is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can you deliver CLS timber to a site with restricted access in Bo’ness?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Also delivering CLS timber nearby
- CLS Studwork Timber in Grangemouth
- CLS Studwork Timber in Falkirk
- CLS Studwork Timber in Rosyth
- CLS Studwork Timber in Dunfermline
- CLS Studwork Timber in Stenhousemuir
- CLS Studwork Timber in Bathgate
Complete your Bo’ness order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.