CLS Studwork Timber delivery in Shepherds Bush

CLS Studwork Timber we supply in Shepherds Bush

• Noggins and head platesCut from the same stock.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Planning the drop in Shepherds Bush

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Shepherds Bush is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• On busy streets in Shepherds Bush, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Working out quantities for your Shepherds Bush job

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Ordering CLS timber for Shepherds Bush: FAQs

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Do you deliver CLS timber to Shepherds Bush?

Yes. We deliver across Shepherds Bush, including W12, W14, W11, W8. Shepherds Bush is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Do you deliver CLS timber to trades and homeowners in Shepherds Bush?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.