SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivered to Chiswick

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

Trades and homeowners in Chiswick can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Delivery facts for Chiswick

Daylight
About 7h 50m on the shortest day
Postcode districts
W4, W14, W6, W3
Nearby (straight line)
Acton (1 mi), Barnes (1 mi), Shepherds Bush (2 mi)
How it arrives
Bundles with your boards
Delivering to
Chiswick, Greater London
Delivery
Standard mainland delivery

Our CLS timber range for Chiswick jobs

  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • FixingsScrews, nails and frame fixings to suit.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • Noggins and head platesCut from the same stock.

Things to check before you order

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Quantities: a worked example

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivering CLS timber in Chiswick

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Chiswick is inside our standard mainland delivery area.

  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Your questions answered

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Can you deliver CLS timber to a site with restricted access in Chiswick?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Chiswick?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price