SK Trade, sktrade.co.uk

Timber & Sheets

CLS Studwork Timber delivery in Willesden

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

We deliver CLS timber to sites, driveways and yards across Willesden, from a single pallet for a small job to full loads for bigger builds.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Willesden delivery at a glance

Nearby (straight line)
Cricklewood (2 mi), Notting Hill (2 mi), Shepherds Bush (2 mi)
Daylight
About 7h 49m on the shortest day
Delivery
Standard mainland delivery
Postcode districts
NW10, W10
Delivering to
Willesden, Greater London
How it arrives
Bundles with your boards

CLS Studwork Timber we supply in Willesden

  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • FixingsScrews, nails and frame fixings to suit.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
  • Noggins and head platesCut from the same stock.

Things to check before you order

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Delivery to Willesden: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Willesden is inside our standard mainland delivery area.

  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
  • On busy streets in Willesden, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.

Estimating your CLS timber

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Your questions answered

Can I add other materials to my Willesden delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Do you deliver CLS timber to trades and homeowners in Willesden?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price