Timber & Sheets
CLS Studwork Timber delivery in Cumbria
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Across Cumbria, from Carlisle to Workington, we supply CLS timber delivered to site with the price and date confirmed in writing.
Cumbria at a glance
- Covering
- 5 towns across Cumbria
- Postcode areas
- CA, LA
- Delivery
- Standard mainland delivery
- How it arrives
- Bundles with your boards
- Neighbouring areas
- Dumfries and Galloway, Lancashire, Durham
Which CLS timber can you order in Cumbria?
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
CLS Studwork Timber delivered in Cumbria towns
- CLS Studwork Timber in Carlisle
- CLS Studwork Timber in Barrow-in-Furness
- CLS Studwork Timber in Kendal
- CLS Studwork Timber in Whitehaven
- CLS Studwork Timber in Workington
Sizing your order
A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Delivering CLS timber in Cumbria
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Our standard mainland delivery area covers Cumbria.
- On busy streets in Cumbria, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
Before you order CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Common questions from Cumbria
Can I add other materials to my Cumbria delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can you deliver CLS timber to a site with restricted access in Cumbria?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
CLS Studwork Timber in neighbouring areas
- CLS Studwork Timber in Dumfries and Galloway
- CLS Studwork Timber in Lancashire
- CLS Studwork Timber in Durham
- CLS Studwork Timber in Merseyside
- CLS Studwork Timber in Tyne and Wear
More materials delivered across Cumbria
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.