Timber & Sheets
CLS Studwork Timber delivery in Kirkcaldy
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
SK Trade is a builders' merchant delivering CLS timber into Kirkcaldy, priced to your postcode and confirmed in writing.

CLS Studwork Timber to Kirkcaldy: the basics
- How it arrives
- Bundles with your boards
- Delivery
- Standard mainland delivery
- Daylight
- About 6h 55m on the shortest day
- Postcode districts
- KY1, KY2, KY3
- Nearby (straight line)
- Glenrothes (5 mi), Cowdenbeath (7 mi), Edinburgh (11 mi)
- Delivering to
- Kirkcaldy, Fife
What CLS timber can we deliver to Kirkcaldy?
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Picking the right product
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Quantities: a worked example
A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
How delivery works in Kirkcaldy
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Kirkcaldy is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- On busy streets in Kirkcaldy, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Give us the full postcode for the drop point; deliveries around KY1 are priced to the exact address.
Questions about CLS timber delivery in Kirkcaldy
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Do you deliver CLS timber to Kirkcaldy?
Yes. We deliver across Kirkcaldy, including KY1, KY2, KY3. Kirkcaldy is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
How soon can CLS timber be delivered in Kirkcaldy?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Close to Kirkcaldy
- CLS Studwork Timber in Glenrothes
- CLS Studwork Timber in Cowdenbeath
- CLS Studwork Timber in Edinburgh
- CLS Studwork Timber in Dunfermline
- CLS Studwork Timber in Rosyth
- CLS Studwork Timber in Musselburgh
Other materials for Kirkcaldy sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
