CLS Studwork Timber delivered to Musselburgh

Choosing from our CLS timber range

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Working out quantities for your Musselburgh job

A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivering CLS timber in Musselburgh

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Musselburgh is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• With roughly 6h 57m of daylight in Musselburgh around the shortest day, morning deliveries leave more working light for the job.

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Ordering CLS timber for Musselburgh: FAQs

Can you deliver CLS timber to a site with restricted access in Musselburgh?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Do you deliver CLS timber to trades and homeowners in Musselburgh?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.