CLS Studwork Timber for Greenock, delivered to site

Choosing from our CLS timber range

• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.

Picking the right product

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

A quick quantity check

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Greenock: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Greenock is inside our standard mainland delivery area.

• On busy streets in Greenock, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• If neighbours share the access, it helps to let them know a lorry is coming.

Common questions from Greenock

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Can you deliver CLS timber to a site with restricted access in Greenock?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Greenock?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.