CLS Studwork Timber for Dumbarton, delivered to site

What CLS timber can we deliver to Dumbarton?

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.

Planning the drop in Dumbarton

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Dumbarton is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Working out quantities for your Dumbarton job

A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Getting the right CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

CLS Studwork Timber questions

How soon can CLS timber be delivered in Dumbarton?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is there a minimum order for delivery to Dumbarton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.