Timber & Sheets
CLS Studwork Timber delivery in Carlisle
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Carlisle, from a single pallet for a small job to full loads for bigger builds.
CLS Studwork Timber to Carlisle: the basics
- How it arrives
- Bundles with your boards
- Delivering to
- Carlisle, Cumbria
- Postcode districts
- CA1, CA3, CA2, CA4
- Nearby (straight line)
- Annan (14 mi), Dumfries (29 mi), Locharbriggs (29 mi)
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 11m on the shortest day
Which CLS timber can you order in Carlisle?
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- FixingsScrews, nails and frame fixings to suit.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Delivery to Carlisle: what helps
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Carlisle is inside our standard mainland delivery area.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- Give us the full postcode for the drop point; deliveries around CA1 are priced to the exact address.
Picking the right product
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
A quick quantity check
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Ordering CLS timber for Carlisle: FAQs
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Do you deliver CLS timber to Carlisle?
Yes. We deliver across Carlisle, including CA1, CA3, CA2, CA4. Carlisle is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can you deliver CLS timber to a site with restricted access in Carlisle?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Annan
- CLS Studwork Timber in Dumfries
- CLS Studwork Timber in Locharbriggs
- CLS Studwork Timber in Workington
- CLS Studwork Timber in Whitehaven
- CLS Studwork Timber in Hawick
Also available in Carlisle
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.