Order sand for delivery in Carlisle

Our sand range for Carlisle jobs

• Plastering sandWashed sand for render and sand-and-cement plaster.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.

Things to check before you order

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Quantities: a worked example

A 10 m² floor screed at 65 mm is 0.65 m³: about 1.04 tonnes of sharp sand at a 1:4 mix, or 2 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Before your Carlisle delivery arrives

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Carlisle is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Common questions from Carlisle

How soon can sand be delivered in Carlisle?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can you deliver sand to a site with restricted access in Carlisle?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can bulk bags go on my drive?

Yes, if the crane can reach and the drive can take the weight. Tell us about any block paving or soft ground.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.