CLS Studwork Timber for Workington, delivered to site

What CLS timber can we deliver to Workington?

• FixingsScrews, nails and frame fixings to suit.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.

Getting the right CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

How much will you need?

A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Delivery to Workington: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Workington is inside our standard mainland delivery area.

• If neighbours share the access, it helps to let them know a lorry is coming.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• In summer Workington gets around 17h 17m of daylight, but early deliveries still beat the traffic and give the longest working day.

CLS Studwork Timber questions

Can you deliver CLS timber to a site with restricted access in Workington?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Workington?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.