Timber & Sheets
CLS Studwork Timber delivery in Nairn
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Nairn can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

Delivery facts for Nairn
- Delivery
- Quoted individually (Highlands and remote areas)
- How it arrives
- Bundles with your boards
- Postcode districts
- IV12
- Daylight
- About 6h 34m on the shortest day
- Nearby (straight line)
- Forres (10 mi), Inverness (15 mi), Alness (16 mi)
- Delivering to
- Nairn, Highland
Which CLS timber can you order in Nairn?
- FixingsScrews, nails and frame fixings to suit.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- Noggins and head platesCut from the same stock.
Before your Nairn delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Nairn is in an area where deliveries are priced individually because of the distance and access, so we quote each order separately.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
Quantities: a worked example
A 2.4 m partition 2.4 m high at 400 mm centres takes 7 CLS studs, 4.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting the right CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Ordering CLS timber for Nairn: FAQs
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Is there a minimum order for delivery to Nairn?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Can I add other materials to my Nairn delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
CLS Studwork Timber near Nairn
- CLS Studwork Timber in Forres
- CLS Studwork Timber in Inverness
- CLS Studwork Timber in Alness
- CLS Studwork Timber in Elgin
- CLS Studwork Timber in Lossiemouth
- CLS Studwork Timber in Buckie
More materials delivered to Nairn
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
