Order CLS timber for delivery in Fraserburgh

What CLS timber can we deliver to Fraserburgh?

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.

Delivery to Fraserburgh: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Fraserburgh is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Choosing CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

A quick quantity check

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Ordering CLS timber for Fraserburgh: FAQs

Do you deliver CLS timber to Fraserburgh?

Yes. We deliver across Fraserburgh, including AB43. Fraserburgh is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Do you deliver CLS timber to trades and homeowners in Fraserburgh?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.