Timber & Sheets
Order CLS timber for delivery in Ayr
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
SK Trade prices CLS timber delivered to Ayr and the rest of Ayrshire, so the cost and the delivery date are agreed before anything is loaded.

Your Ayr delivery
- How it arrives
- Bundles with your boards
- Delivering to
- Ayr (Ayrshire)
- Nearby (straight line)
- Prestwick (2 mi), Troon (6 mi), Irvine (11 mi)
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 04m on the shortest day
- Postcode districts
- KA7, KA8, KA9
CLS Studwork Timber available for Ayr delivery
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
Before your Ayr delivery arrives
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Ayr is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Estimating your CLS timber
A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Things to check before you order
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Ordering CLS timber for Ayr: FAQs
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
How soon can CLS timber be delivered in Ayr?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Can I add other materials to my Ayr delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Other towns near Ayr
- CLS Studwork Timber in Prestwick
- CLS Studwork Timber in Troon
- CLS Studwork Timber in Irvine
- CLS Studwork Timber in Kilmarnock
- CLS Studwork Timber in Kilwinning
- CLS Studwork Timber in Newton Mearns
Also available in Ayr
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
