SK Trade, sktrade.co.uk

Building Materials

Order bricks for delivery in Ross-on-Wye

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

Whether it is a repair, an extension or a new build in Ross-on-Wye, we can supply the bricks and deliver to site.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Your Ross-on-Wye delivery

Delivering to
Ross-on-Wye, Herefordshire
Delivery
Standard mainland delivery
Postcode districts
HR9
How it arrives
Strapped packs, usually crane offload
Nearby (straight line)
Ledbury (10 mi), Hereford (12 mi), Gloucester (14 mi)
Daylight
About 7h 45m on the shortest day

Choosing from our bricks range

  • Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.
  • Perforated and frogged bricksHoles or a frog reduce weight and help the mortar key.
  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
  • Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.

Getting bricks onto your Ross-on-Wye site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Ross-on-Wye is inside our standard mainland delivery area.

  • Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
  • If neighbours share the access, it helps to let them know a lorry is coming.
  • With roughly 7h 45m of daylight in Ross-on-Wye around the shortest day, morning deliveries leave more working light for the job.

How much will you need?

Take a garden wall in Ross-on-Wye 10 m long and 1.5 m high: 15 m². At 60 bricks per square metre plus 5% for cuts that is 945 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.88 tonnes of building sand and 8 bags of cement at a 1:4 mix. Try the brick calculator

Choosing bricks

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or building control may specify one.

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Questions about bricks delivery in Ross-on-Wye

Can you match my existing bricks?

Often, yes. Send the brick name if you have it, or a daylight photo of a clean face with a tape measure for scale. We will look for the nearest match in current ranges and can usually arrange a sample before you commit to a full order.

Is there a minimum order for delivery to Ross-on-Wye?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Which bricks go below the damp-proof course?

Below DPC you need bricks that cope with constant damp and frost: engineering bricks, or clay facings declared F2 and S2. Concrete bricks are another option for below-ground work.

Can I add other materials to my Ross-on-Wye delivery?

Yes. Put everything on one list, from bricks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price