Concrete & Aircrete Blocks for Ross-on-Wye, delivered to site

Concrete & Aircrete Blocks available for Ross-on-Wye delivery

• Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
• Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.
• Trench and foundation blocksWide blocks laid in foundation trenches instead of lots of concrete.
• Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
• Block paving and edgingsOn request alongside your sub-base and sand.

Getting concrete blocks onto your Ross-on-Wye site

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Ross-on-Wye is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

A quick quantity check

A single-skin block wall in Ross-on-Wye 6 m long and 2.4 m high is 14.4 m². At 10 blocks per square metre plus 5% you need 152 blocks, with about 0.21 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Things to check before you order

What strength do I need?

Most houses use 3.6 N/mm² or 7.3 N/mm² blocks. Your structural design, your building control officer or the block manufacturer's guidance sets the grade; tell us what is specified and we will match it.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Concrete & Aircrete Blocks questions

How heavy is a concrete block?

It depends on the type and thickness. A 100 mm dense block is roughly 18 to 20 kg, a lightweight block noticeably less, and an aircrete block much less again.

Can I add other materials to my Ross-on-Wye delivery?

Yes. Put everything on one list, from concrete blocks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver concrete blocks to a site with restricted access in Ross-on-Wye?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.