Plasterboard delivery in Coulsdon

Our plasterboard range for Coulsdon jobs

• Screws, tape and jointingDrywall screws, scrim and jointing compound.
• Tapered and square edgeTapered edge for taped joints; square edge for skimming.
• Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
• Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.
• Acoustic boardDenser board to reduce sound between rooms.

How delivery works in Coulsdon

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Coulsdon is inside our standard mainland delivery area.

• Give us the full postcode for the drop point; deliveries around CR5 are priced to the exact address.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Sizing your order

A new 2.4 m partition 2.7 m high, boarded on both sides, is 12.96 m² of board: 5 sheets of 2400 × 1200 mm with 10% for cutting, and about 175 drywall screws. Try the plasterboard calculator

Choosing plasterboard

Tapered or square edge?

Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.

Which board type?

Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Plasterboard questions

Can I add other materials to my Coulsdon delivery?

Yes. Put everything on one list, from plasterboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

What plasterboard for a bathroom?

Moisture-resistant board for general bathroom walls and ceilings. In shower areas use a tile backer board designed for wet areas.

What thickness plasterboard for walls?

12.5 mm is the standard choice for walls on studs at 400 or 600 mm centres.

Can you deliver plasterboard to a site with restricted access in Coulsdon?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.